£ GBP
€ EUR
$ USD
Ubiquiti UniFi Access G2 Starter Kit - UA-G2-SK
Ubiquiti UA-G2-SK
£269.99
Availability:
Despatched today
if ordered within the next 0 mins
Linitx Quick Code # 17673
Manufacturer SKU: UA-G2-SK
Manufacturer: Ubiquiti Inc
| Quantity | 1+ | 10+ | 20+ | 50+ | 100+ | 250+ |
| Price | £224.99 EXC VAT | £222.74 EXC VAT | £220.49 EXC VAT | £217.12 EXC VAT | £213.74 EXC VAT | Call Us 01449 888000 |
||||Ubiquiti UniFi UA-G2-SK Access G2 Starter Kit
At a Glance:
- 1 x UniFi Access Door Hub - intelligent, IP networked, single door controller
- 1 x Access Reader G2 - premium NFC reader
- 10 x UniFi Access Cards - secure NFC smart card
- Door Hub is PoE++ powered
- NFC reader is IP55 weatherproof
- NFC cards operate at a frequency of 13.56 MHz
The Ubiquiti UniFi Access G2 Starter Kit (UA-G2-SK) provides a comprehensive solution for secure door access control.
UA-G2-SK Kit includes:
UniFi Access Door Hub (UA-Hub-Door): This smart hub features 5 x 10/100/1000 Base-T Ethernet ports with PoE++ power available. The maximum power consumption is 30W without PoE output and 50W with PoE output.
Access Reader G2 (UA-G2): The Access Reader G2 is IP55 weatherproof, and uses a single 10/100 MbE RJ45 port for networking. The reader includes a proximity sensor, an 8 ohm, 0.7W speaker, and supports NFC technology.
UniFi Access Cards (UA-Card): These cards have dimensions of 85.6 x 53.98 x 0.84 mm. They comply with ISO 7810 ID-1 format and use NFC technology operating at a frequency of 13.56 MHz, including MIFARE DESFire and UniFi Access Proprietary Security Protocol.
| UA-Hub-Door Mechanical | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") | ||||||||||||||||||||||||
| Weight | 363 g (12.8 oz) | ||||||||||||||||||||||||
| Enclosure material | Polycarbonate | ||||||||||||||||||||||||
| Mounting material | Polycarbonate | ||||||||||||||||||||||||
| Hardware | |||||||||||||||||||||||||
| Networking interface | (5) 10/100/1000 Base-T | ||||||||||||||||||||||||
| Power method | PoE++ UL 294 Power-limited Class 2 PSU UL 60950/62368 LPS/PS2 PSU | ||||||||||||||||||||||||
| Max. power consumption | Without PoE output: 30W With PoE output: 50W | ||||||||||||||||||||||||
| PoE input | 50V DC, 1A | ||||||||||||||||||||||||
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 20W | ||||||||||||||||||||||||
| Button | (1) Factory-reset | ||||||||||||||||||||||||
| LEDs | System: white/blue Output relays: white | ||||||||||||||||||||||||
| Digital input | Request to exit/request to enter/remote release/door position sensor | ||||||||||||||||||||||||
| Dry output relay | Lock: 30V DC, 1A Aux: 30V DC, 1A | ||||||||||||||||||||||||
| Powered output relay | Lock: 12V DC, 1A Aux: 12V DC, 0.33A 12V DC, 0.33A | ||||||||||||||||||||||||
| Operating environment | Indoor use only | ||||||||||||||||||||||||
| Operating temperature | 0 to 40° C (32 to 104° F) | ||||||||||||||||||||||||
| Operating humidity | 5 to 95% noncondensing | ||||||||||||||||||||||||
| UL 294 level | Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I | ||||||||||||||||||||||||
| UL 294 statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. | ||||||||||||||||||||||||
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 | ||||||||||||||||||||||||
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 | ||||||||||||||||||||||||
| Document number, and issue date and/or revision level | UA-Hub-Door002, V01 | ||||||||||||||||||||||||
| Wiring Information | |||||||||||||||||||||||||
| Typical installation (Shielded) |
| ||||||||||||||||||||||||
| Wiring gauge requirements (AWG) |
| ||||||||||||||||||||||||
| PoE cabling requirements | The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable. | ||||||||||||||||||||||||
| LEDs | |||||||||||||||||||||||||
| PoE in | Steady blue: Adopted/device is ready Steady white: Pending adoption Blinking white/blue: Upgrading firmware | ||||||||||||||||||||||||
| PoE out | Off: Not connected or no data link Steady blue: Connected and data link on | ||||||||||||||||||||||||
| UA-G2 Mechanical | |||||||||||||||||||||||||
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") | ||||||||||||||||||||||||
| Weight | 82 g (2.9 oz) | ||||||||||||||||||||||||
| Enclosure material | Polycarbonate, glass | ||||||||||||||||||||||||
| Mounting | In wall, gang box | ||||||||||||||||||||||||
| Weatherproofing | IP55 | ||||||||||||||||||||||||
| Hardware | |||||||||||||||||||||||||
| Networking interface | (1) 10/100 MbE RJ45 port | ||||||||||||||||||||||||
| Connectivity | BLE 4.1 | ||||||||||||||||||||||||
| Power method | PoE | ||||||||||||||||||||||||
| Supported voltage range | 48V DC | ||||||||||||||||||||||||
| Max. power consumption | 5W | ||||||||||||||||||||||||
| ESD/EMP protection | Air: ±15kV, contact: ±8kV | ||||||||||||||||||||||||
| Sensors | Proximity sensor | ||||||||||||||||||||||||
| Speaker | (1) 8 ohm, 0.7W | ||||||||||||||||||||||||
| LEDs | R/G/B/W | ||||||||||||||||||||||||
| Button | (1) Factory-reset | ||||||||||||||||||||||||
| NFC frequency | 13.56 MHz | ||||||||||||||||||||||||
| NFC read range | < 30 mm | ||||||||||||||||||||||||
| NFC standards | ISO 14443A, 14443B, 15693 | ||||||||||||||||||||||||
| NFC technology | NFC Tag 1,2,3,4,5 MIFARE Classic MIFAREPlus MIFARE Ultralight MIFARE DESFire | ||||||||||||||||||||||||
| Operating temperature | -30 to 45° C (-22 to 113° F) | ||||||||||||||||||||||||
| Operating humidity | 5 to 90% noncondensing | ||||||||||||||||||||||||
| Certifications | CE, FCC, IC | ||||||||||||||||||||||||
| UA-Card Mechanical | |||||||||||||||||||||||||
| Dimensions | 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03") | ||||||||||||||||||||||||
| Weight | 5 g (0.18 oz) | ||||||||||||||||||||||||
| Format | ISO 7810 ID-1 | ||||||||||||||||||||||||
| NFC frequency | 13.56 MHz | ||||||||||||||||||||||||
| NFC technology | ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol | ||||||||||||||||||||||||
Box Contents:
- 1 x UniFi Access Door Hub
- 1 x Access Reader G2
- 10 x UniFi Access Cards
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
UniFi Access UA-G2-SK Installation
