Tycon 4 Port 90W Managed Gigabit BT PoE Switch + 2 SFP - TP-SW4GBT-2SFP
Tycon TP-SW4GBT-2SFP
£335.99
Availability: Despatched next working day
Linitx Quick Code # 16983
Manufacturer SKU: TP-SW4GBT-2SFP
EAN: 00810017123377
Manufacturer: Tycon Systems
Quantity | 1+ | 10+ | 20+ | 50+ | 100+ | 250+ |
Price | £279.99 EXC VAT | £277.19 EXC VAT | £274.39 EXC VAT | £270.19 EXC VAT | £265.99 EXC VAT | Call Us 01449 888000 |
Tycon Systems 4 Port 90W Managed Gigabit 802.3bt PoE Switch 46-57VDC Input with 2 SFP - TP-SW4GBT-2SFP
The Tycon Systems TP-SW4GBT-2SFP is a high-speed, managed, layer 2 ethernet switch with four gigabit POE++ ports and two 2.5G SFP ports.
The POE functionality of the TP-SW4GBT-2SFP can be managed via the user interface, and each port can offer a power budget of 90W to connected devices for a total POE budget of 360W across the whole switch.
The TP-SW4GBT-2SFP supports SSH and SSL for secure access to the user interface via the serial console port or any of the the ethernet ports. TELNET, SNMP, and HTTP/HTTPS can all also be used to access the user interface.
The TP-SW4GBT-2SFP meets Green Ethernet standards - it can automatically power down the Ethernet drivers in a port when the link is not active and resume the connection without packet loss when link is active again. The ethernet signal strength is also automatically adjusted based on cable length for even more power savings.
TP-SW4GBT-2SFP | |
---|---|
Ports | 4 Ports 802.3af/at/bt, PoE++ (90W) 2 SFP/LC 2.5Gigabit Fiber Ports 1 Console Port |
Ethernet transmission speed | 10/100/1000Mbps Auto-negotiation |
Fiber transceiver compatibility | 155M/1.25G/2.5G Multi Mode or Single Mode |
Connections | Shielded RJ45, Shielded SFP/LC, Grounded to Case |
Power input | Vin 48VDC to 57VDC on dual input wire terminal (max wire size 12AWG) |
Power consumption | < 5 watts typical |
LEDs - normal state | Power: Red System: Green Ethernet Link: Green Flashing PoE: Amber Fiber: Green |
POE protections | Over voltage, over current, short circuit |
POE pinout | 802.3af/at Ports = 1/2 V- ; 3/6 V+ 802.3bt Ports = 1/2,7/8 V- ; 3/6,4/5 V+ |
Surge protection | 6KV normal mode, 2KV differential mode |
ESD protection | 15KV air, 8KV touch |
Management methods | Web, CLI, Telnet, SSH, SNMP |
VLANs | Supports up to 4K VLANs simultaneously, port-based VLAN, 802.1Q tag-based VLAN |
Port management | Enable/disable port, speed duplex, MTU setting, flow control, mirroring, in/out direction, speed limit, isolation settings, unknown unitcast/multicast/broadcast storm supression |
STP | Standard spanning tree (STP) 802.1d, Rapid spanning tree (RSTP) 802.1w, Multiple spanning tree (MSTP) 802.1s |
Ring network protocol | ERPS (Ethernet Ring Protection Switching) |
Link Aggregation | Static/manual aggregation, LACP dynamic convergence |
IGMP v1/v2/v3 snooping | IGMP limits bandwidth intensive multicast traffic to only the required requester; supports 256 multicast groups |
MAC management | Add/delete, MAC address learning limit, dynamic ageing time setting |
Layer 3 switching functions | Virtual VLAN interface, ARP, static router |
ACL (Access Control List) | Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number; supports time-range time management |
QOS (Quality Of Service) | 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification Supports SP/WRR/DRR Scheduling Strategy and Traffic Speed Limit (CAR) |
Anti-Attack support | DOS defence, CPU protection, limit message send rate, ARP Biding (IP, MAC, PORT) |
Other Functions | LLDP, add/delete users, log user login/operation/status/events, port security (dying gasp/SNMP trap), device reset, configuration save/restore, NTP time setting, upgrade management |
Jumbo frame support | 9.6k |
Switching capacity | 18 Gbps |
Packet forwarding rate | 13.39Mpps |
Forwarding mode | Store and forward |
Package cache | 4M |
RAM/Flash | 128MB/16MB |
Address Table | 8k MAC, self-learning |
Network protocols and standards summary | IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs, 802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af/at/bt (PoE), 802.3az Energy-Saving, IEEE G.8032 Ethernet ring protection (<50ms), (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s |
Other industry standards | EMI: FCC Part 15, CISPR (EN55032) class A, EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge), Shock: IEC 60068-2-27, Free Fall: IEC 60068-2-32, Vibration: IEC 60068-2-6 |
Environmental protection | IP40 |
Operating temperature | -40°C to +85°C |
Operating humidity | 5%-95% (non condensing) |
Storage temperature | -40°C to +85°C |
MTBF | 100,000 hours |
Certifications | CE, FCC< RoHS |
Dimensions (L x W x H) | 155 x 117 x 38 mm |
Weight | 600g |
- 1x TP-SW4GBT-2SFP
- 1x Female Serial to RJ45 Ethernet cable
- Wall Mount Kit (screws Included)
- 1x Quick Start Guide
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
TP-SW4GBT-2SFP Quick Start Guide