PC Engines APU2 E2 System Board 2GB RAM

PC Engines APU2 E2 System Board 2GB RAM

The PC Engines APU 2 E2 with 2GB RAM system board is a big step up in performance and capacity from the popular ALIX series.

The APU 2 E2 can be used in a number of different ways: as a router, firewall, VOIP, dedicated server, special purpose network plumbing, education tool...

The APU 2 E2 features AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.

Users can boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. For power options, the APU 2 E2 works with 12V DC, about 6 to 12W depending on CPU load. It also offers Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).

The APU 2 E2 also features 2 x miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD),3 Gigabit Ethernet channels (Intel i211AT on apu2b2, i210AT on apu2b4). 

APU 2 E2 size: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.

The power supply required for this board is not the same as that for the Alix/Wrap boards.

APU2E2 Specifications:

• CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
• DRAM: 2 GB DDR3-1333 DRAM
• Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector.
• Power: 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Connectivity: 3 Gigabit Ethernet channels (Intel i211AT on apu2b2, i210AT on apu2b4)
• Firmware: CoreBoot open source system BIOS with support for iPXE and USB boot.
• Form factor: 6 x 6" (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e
• Cooling: Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).