LinITX APU1 D4 Network 4GB + 16GB SSD pfSense Pre-Configured Kit - Blue Enclosure - (3NIC+USB+RTC)

LinITX APU1 D4 Network Firewall + 4GB + 16GB M-SATA SSD - pfSense Pre-Configured Kit (Blue Enclosure)

LinITX APU1 D4 4GB (3NIC+USB+RTC) + 16 GB SSD (pre-installed) with pfSense is a custom built small form factor pfSense firewall.

Please note, the case colour for this particular unit is in BLUE (as shown in 1 of the pictures) and is already pre-installed with a 16GB M-SATA MLC Phison SSD.

Note - The latest full version of pfSense will be installed. This does not include a PSU.

Please note, all pfSense kits are built to order and are not always eligible for same day dispatch.

Specifications:

• CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K data + 32K instruction + 512K L2 cache per core
• DRAM: 2 or 4 GB DDR3-1066 DRAM
• Storage: Boot from SD card (connected through USB), external USB or mSATA SSD. 1 SATA + power connector.
• 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
• Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E)
• I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton
• Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD)
• Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E
• Firmware: coreboot
• Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).

1x APU1 D4

Does not include PSU